资源描述：
BS EN ISO 1452-52009 ICS 23.040.20; 23.040.45; 91.140.60; 93.025 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BRITISH STANDARD Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized polyvinyl chloride PVC-U Part 5 Fitness for purpose of the system ISO 1452-52009 Licensed Copy athen reading, Reading University Library, 24/01/2010 0957, Uncontrolled Copy, c BSI This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2010 BSI 2010 ISBN 978 0 580 59546 2 Amendments/corrigenda issued since publication Date Comments BS EN ISO 1452-52009 National foreword This British Standard is the UK implementation of EN ISO 1452-52009. Together with BS EN ISO 1452-12009, BS EN ISO 1452-22009, BS EN ISO 1452-32009 and BS EN ISO 1452-42009, it supersedes BS EN 1452-51999 and BS EN 1456-12001 which are withdrawn. The UK participation in its preparation was entrusted to Technical Committee PRI/88/2, Plastics piping for pressure applications. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Licensed Copy athen reading, Reading University Library, 24/01/2010 0957, Uncontrolled Copy, c BSI 标准分享网 w w w .b z f x w .c o m 免费下载 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 1452-5 December 2009 ICS 93.025; 91.140.60; 23.040.20; 23.040.45 Supersedes EN 1452-51999, EN 1456-12001 English Version Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized polyvinyl chloride PVC-U - Part 5 Fitness for purpose of the system ISO 1452-52009 Systmes de canalisations en plastique pour lalimentation en eau, pour branchements et collecteurs dassainissement enterrs et ariens avec pression - Polychlorure de vinyle non plastifi PVC-U - Partie 5 Aptitude lemploi du systme ISO 1452-52009 Kunststoff-Rohrleitungssysteme fr die Wasserversorgung und fr erdverlegte und nicht erdverlegte Entwsserungs- und Abwasserdruckleitungen - Weichmacherfreies Polyvinylchlorid PVC-U - Teil 5 Gebrauchstauglichkeit des Systems ISO 1452-52009 This European Standard was approved by CEN on 4 November 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions English, French, German. A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1452-52009 E Licensed Copy athen reading, Reading University Library, 24/01/2010 0957, Uncontrolled Copy, c BSI BS EN ISO 1452-52009 EN ISO 1452-52009 E 3 Foreword This document EN ISO 1452-52009 has been prepared by Technical Committee CEN/TC 155 “Plastics piping systems and ducting systems“, the secretariat of which is held by NEN, in collaboration with Technical Committee ISO/TC 138 “Plastics pipes, fittings and valves for the transport of fluids“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1452-51999, EN 1456-12001. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy athen reading, Reading University Library, 24/01/2010 0957, Uncontrolled Copy, c BSI 标准分享网 w w w .b z f x w .c o m 免费下载 w w w . b z f x w . c o m BS EN ISO 1452-52009 ISO 1452-52009E ISO 2009 – All rights reserved iii Contents Page Foreword ............................................................................................................................................................iv Introduction.........................................................................................................................................................v 1 Scope......................................................................................................................................................1 2 Normative references............................................................................................................................1 3 Terms and definitions, symbols and abbreviations ..........................................................................2 4 Fitness for purpose of joints and the system.....................................................................................2 4.1 Assemblies with non-end-load-bearing joints....................................................................................2 4.2 Assemblies with end-load-bearing joints ...........................................................................................3 4.3 Short-term pressure test for leaktightness of assemblies................................................................3 4.4 Short-term negative pressure test for leaktightness of assemblies................................................4 4.5 Long-term pressure test for leaktightness of assemblies ................................................................5 Annex A normative Assemblies of imperial inch-sized pipes, fittings, valves and ancillaries .............7 Annex B inative Determination of the long-term test pressure by creep consideration...................9 Bibliography......................................................................................................................................................13 Licensed Copy athen reading, Reading University Library, 24/01/2010 0957, Uncontrolled Copy, c BSI w w w . b z f x w . c o m BS EN ISO 1452-52009 ISO 1452-52009E iv ISO 2009 – All rights reserved Foreword ISO the International Organization for Standardization is a worldwide federation of national standards bodies ISO member bodies. The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission IEC on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 1452-5 was prepared by the European Committee for Standardization CEN Technical Committee CEN/TC 155, Plastics piping systems and ducting systems, in collaboration with ISO Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the transport of fluids, Subcommittee SC 2, Plastics pipes and fittings for water supplies, in accordance with the Agreement on technical cooperation between ISO and CEN Vienna Agreement. This first edition cancels and replaces ISO 4422-51997, which has been technically revised. ISO 1452 consists of the following parts, under the general title Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized polyvinyl chloride PVC-U ⎯ Part 1 General ⎯ Part 2 Pipes ⎯ Part 3 Fittings ⎯ Part 4 Valves ⎯ Part 5 Fitness for purpose of the system Guidance for the assessment of conity is to the subject of a part 7. Licensed Copy athen reading, Reading University Library, 24/01/2010 0957, Uncontrolled Copy, c BSI 标准分享网 w w w .b z f x w .c o m 免费下载 w w w . b z f x w . c o m BS EN ISO 1452-52009 ISO 1452-52009E ISO 2009 – All rights reserved v Introduction The System Standard, of which this is Part 5, specifies the requirements for a piping system and its components made from unplasticized polyvinyl chloride PVC-U. The piping system is intended to be used for water supply and for buried and above-ground drainage and sewerage under pressure. In respect of potential adverse effects on the quality of water intended for human consumption, caused by the products covered by this part of ISO 1452, the following are relevant. a This part of ISO 1452 provides no ination as to whether the products may be used without restriction; b Existing national regulations concerning the use and/or the characteristics of these products remain in force. Requirements and test s for components requirements and test s are specified in ISO 1452-2, ISO 1452-3 and ISO 1452-4. This part of ISO 1452 establishes the characteristics of fitness for purpose of the plastics piping system composed of pipes, fittings, valves, ancillaries and their joints. Guidance for installation is given in ISO/TR 4191[1]. Guidance for assessment of conity is provided in ENV 1452-7[2]. Licensed Copy athen reading, Reading University Library, 24/01/2010 0957, Uncontrolled Copy, c BSI w w w . b z f x w . c o m BS EN ISO 1452-52009 Licensed Copy athen reading, Reading University Library, 24/01/2010 0957, Uncontrolled Copy, c BSI 标准分享网 w w w .b z f x w .c o m 免费下载 w w w . b z f x w . c o m BS EN ISO 1452-52009 INTERNATIONAL STANDARD ISO 1452-52009E ISO 2009 – All rights reserved 1 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized polyvinyl chloride PVC-U Part 5 Fitness for purpose of the system 1 Scope This part of ISO 1452 specifies the characteristics for the fitness for purpose of unplasticized polyvinyl chloride PVC-U piping systems intended for water supply and for buried and above-ground drainage and sewerage under pressure. It also specifies the test parameters for the test s referred to in this part of ISO 1452. In conjunction with ISO 1452-1, ISO 1452-2, ISO 1452-3 and ISO 1452-4, it is applicable to joints and assemblies with components of PVC-U, other plastics and non-plastics materials intended to be used for the following a water mains and services buried in ground; b conveyance of water above ground for both outside and inside buildings; c buried and above-ground drainage and sewerage under pressure; It is applicable to piping systems intended for the supply of water under pressure up to and including 25 C cold water intended for human consumption and for general purposes as well as for waste water under pressure. This part of ISO 1452 is also applicable to components for the conveyance of water and waste water up to and including 45 C. For temperatures between 25 C and 45 C, Figure A.1 of ISO 1452-22009 applies. NOTE The producer and the end-user can come to agreement on the possibilities of use for temperatures above 45 C on a case-by-case basis. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document including any amendments applies. ISO 1452-1, Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized polyvinyl chloride PVC-U Part 1 General ISO 1452-22009, Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized polyvinyl chloride PVC-U Part 2 Pipes Licensed Copy athen reading, Reading University Library, 24/01/2010 0957, Uncontrolled Copy, c BSI w w w . b z f x w . c o m BS EN ISO 1452-52009 ISO 1452-52009E 2 ISO 2009 – All rights reserved ISO 1452-32009, Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized polyvinyl chloride PVC U Part 3 Fittings ISO 1452-4, Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure Unplasticized polyvinyl chloride PVC U Part 4 Valves ISO 13783, Plastics piping systems Unplasticized polyvinyl chloride PVC-U end-load-bearing double- socket joints Test for leaktightness and strength while subjected to bending and internal pressure ISO 13844, Plastics piping systems Elastomeric-sealing-ring-type socket joints of unplasticized polyvinyl chloride PVC-U for use with PVC-U pipes Test for leaktightness under negative pressure ISO 13845, Plastics piping systems Elastomeric-sealing-ring-type socket
展开阅读全文
