资源描述：
BRITISH STANDARD BS EN 1504-32005 Products and systems for the protection and repair of concrete structures Definitions, requirements, quality control and uation of conity Part 3 Structural and non-structural repair The European Standard EN 1504-32005 has the status of a British Standard ICS 91.080.40; 01.040.91 BS EN 1504-32005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 13 February 2006 BSI 13 February 2006 ISBN 0 580 47658 8 National foreword This British Standard is the official English language version of EN 1504-32005. EN 1504-3 is a candidate “harmonized” European standard and fully takes into account the requirements of the European Commission mandate M/128, Products related to concrete, mortar and grout, given under the EU Construction Products Directive 89/106/EEC, and is intended to lead to CE marking. The date of applicability of EN 1504-3 as a harmonized European Standard, i.e. the date after which this standard may be used for CE marking purposes, is subject to an announcement in the Official Journal of the European Communities. The Commission in consultation with Member States has agreed a transition period for the co-existence of harmonized European Standards and their corresponding national standards. It is intended that this period will comprise a period, usually nine months, after the date of the European Standard, during which any required changes to national regulations are to be made, followed by a further period, usually of 12 months, for the implementation of CE marking. At the end of this co-existence period, the national standardss will be withdrawn. EN 1504-3 is the subject of transitional arrangements agreed under the Commission mandate. In the UK, there are no corresponding national standards of national origin. The UK participation in preparation of EN 1504-32005 was entrusted by Technical Committee B/517, Concrete, to Subcommittee B/517/8, Protection and repair of concrete structures, which has the responsibility to A list of organizations represented on this committee can be obtained on request to its secretary. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests ined; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, page i, a blank page, the EN title page, pages 2 to 25 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments 标准分享网 w w w .b z f x w .c o m 免费下载 w w w . b z f x w . c o m BS EN 1504-32005 i Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. w w w . b z f x w . c o m blank 标准分享网 w w w .b z f x w .c o m 免费下载 w w w . b z f x w . c o m EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1504-3 December 2005 ICS 91.080.40; 01.040.91 English Version Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and uation of conity - Part 3 Structural and non-structural repair Produits et systmes pour la protection et la rparation des structures en bton - Dfinitions, exigences, matrise de la qualit et valuation de la conit - Partie 3 Rparation structurale et rparation non structurale Produkte und Systeme fr den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Qualittsberwachung und Beurteilung der Konitt - Teil 3 Statisch und nicht statisch relevante Instandsetzung This European Standard was approved by CEN on 29 April 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions English, French, German. A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre rue de Stassart, 36 B-1050 Brussels 2005 CENAll rights of exploitation in any and by any means reserved worldwide for CEN national Members. Ref. No. EN 1504-32005 E w w w . b z f x w . c o m EN 1504-32005 E 2 Contents Page Foreword ..........................................................................................................................................................3 1 Scope...................................................................................................................................................4 2 Normative references .........................................................................................................................4 3 Terms and definitions.........................................................................................................................6 4 Perance characteristics for intended uses ...............................................................................6 5 Requirements......................................................................................................................................8 6 Sampling............................................................................................................................................10 7 uation of conity..................................................................................................................10 8 Marking and labelling .......................................................................................................................11 Annex A inative Frequency of tests for factory production control...............................................12 Annex B inative Test s for special applications..................................................................13 Annex C inative Release of dangerous substances ........................................................................14 Annex ZA inative Clauses of this European Standard addressing the provisions of EU Construction Products Directive .....................................................................................................15 Bibliography...................................................................................................................................................25 标准分享网 w w w .b z f x w .c o m 免费下载 w w w . b z f x w . c o m EN 1504-32005 E 3 Foreword This European Standard EN 1504-32005 has been prepared by Technical Committee CEN/TC 104 “Concrete and related products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2006, and conflicting national standards shall be withdrawn at the latest by December 2008. It has been developed by sub-committee 8 “Products and systems for the protection and repair of concrete structures“ Secretariat AFNOR. This European Standard does not supersede any other European Standard. European Standard 1504 has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association and supports essential requirements of EU Construction Products Directive 89/106/EC. For the relationship between Part 3 and the EU Directive, see compulsory inative Annex ZA, which is an integral part of this document. This European Standard includes an inative Annex A, dealing with factory production control, inative Annex B, dealing with special applications and an inative Annex C dealing with the release of dangerous substances. This document is one part of the European Standard on “Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and uation of conity“. The other parts are listed below Part 1 Definitions Part 2 Surface protection systems for concretes Part 4 Structural bonding Part 5 Concrete injection Part 6 Anchoring of reinforcing steel bar1 Part 7 Reinforcement corrosion protection1 Part 8 Quality control and uation of conity Part 9 General principles for use of products and systems2 Part 10 Site application of products and systems and quality control of the works According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 1 To be published. 2 ENV 1504-9 will be modified when adopted as EN according to finalisation of this European Standard. w w w . b z f x w . c o m EN 1504-32005 E 4 1 Scope This European Standard specifies requirements for the identification, perance including durability and safety of products and systems to be used for the structural and non-structural repair of concrete structures. This European Standard covers repair mortars and concretes, possibly used in conjunction with other products and systems, to restore and/or to replace defective concrete and to protect reinforcement, necessary to extend the service life of a concrete structure exhibiting deterioration. The fields of application covered are in accordance with ENV 1504-9 as follows Principle 3 Concrete restoration 3.1 Applying mortar by hand 3.2 Recasting with concrete 3.3 Spraying mortar or concrete Principle 4 Structural strengthening 4.4 Adding mortar or concrete Principle 7 Preserving or restoring passivity 7.1 Increasing cover to reinforcement with mortar or concrete 7.2 Replacing contaminated concrete 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document including any amendments applies. EN 1015-17, s of test for mortars for masonry – Part 17 Determination of water-soluble chloride content of fresh mortars EN 1504-12005, Products and systems for the protection and repair of concrete structures – Definitions requirements, quality control and uation of conity – Part 1 Definitions EN 1504-82004, Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and uation of conity – Part 8 Quality control and uation of conity ENV 1504-91997, Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and uation of conity – Part 9 General principles for use of products and systems EN 1542, Products and systems for the protection and repair of concrete structures – Test s – Measurement of bond strength by pull-off EN 1766, Products and systems for the protection and repair of concrete structures – Test s – Reference concretes for testing EN 1767, Products and systems for the protection and repair of concrete structures – Test s – Infrared analysis EN 1770, Products and systems for the protection and repair of concrete structures – Test s – Determination of the coefficient of thermal expansion EN 1877-1, Products and systems for the protection and repair of concrete structures – Test s – Reactive functions related to epoxy resins – Part 1 Determination of epoxy equivalent 标准分享网 w w w .b z f x w .c o m 免费下载 w w w . b z f x w . c o m EN 1504-32005 E 5 EN 1877-2, Products and systems for the protection and repair of concrete structures – Test s – Reactive functions related to epoxy resins – Part 2 Determination of amine functions using the total basicity number EN 12190, Products and systems for the protection and repair of concrete structures – Test s – Determination of compressive strength of repair mortar EN 12192-1, Products and systems for the protection and repair of concrete structures – Granulometry analysis - Part 1 Test for dry components of premixed mortar EN 12617-4, Products and systems for the protection and repair of concrete structures – Test s – Part 4 Determination of shrinkage and expansion EN 13036-4, Road and airfield surface characteristics – Test s – Part 4 for measurement of slip/skid resistance of a surface – The pendulum test EN 13057, Products and systems for the protection and repair of concrete structures – Test s – Determination of resistance of capillary absorption EN 13294, Products and systems for the protection and repair of concrete structures – Test s – Determination of stiffening time EN 13295, Products and systems for the protection and repair of concrete structures – Test s – Determination of resistance to carbonation EN 13395-1, Products and systems for the protection and repair of concrete structures – Test s – Determination of workability – Part 1 Test for flow of thixotropic mortars EN 13395-2, Products and systems for the protection and repair of concrete structures – Test s – Determination of workability – Part 2 Test for flow of grout or mortar EN 13395-3, Products an
展开阅读全文
